-=viper=-
Full Member
Red Sox World Champs
Posts: 249
|
Post by -=viper=- on Aug 21, 2004 10:33:12 GMT -5
|
|
94
New Member
Loosey Goosey
Posts: 31
|
Post by 94 on Aug 23, 2004 0:55:36 GMT -5
|
|
|
Post by HoustonScooters on Aug 24, 2004 0:29:29 GMT -5
Do NOT put NOS on your scooter, unless you have a lot of money to replace the motor when the piston shoots through the head.
Scooter motors are built to exacting tolerances and are not designed to handle NOS. You'll burn up the motor.
|
|
-=viper=-
Full Member
Red Sox World Champs
Posts: 249
|
Post by -=viper=- on Aug 24, 2004 8:22:03 GMT -5
|
|
|
Post by v2twofastforu on Sept 25, 2004 12:26:30 GMT -5
|
|
|
Post by TheNoisePolluter on Sept 30, 2004 19:15:04 GMT -5
NO, the piston won't shoot through the cylinder, what can happen is if you use nos it will get the engine so hot that the rings will start to melt and the piston will lock up in the cylinder, or from the high rpm's the spark plug will blow right out the cylinder, or from the intense heat the cylinder can explode, but that engine on that goped is an RC water cooled boat engine, that one won't sieze up cuz it has the coolint running through the cylinder, but other than that you'll have those problems on a stock engine.
|
|
|
Post by NHCA on Sept 30, 2004 19:50:11 GMT -5
No thats not a G230RC. Its a 7.7 Horse Power custom billet engine. It looks like some parts of it may be from a RC though
|
|
|
Post by PCX1100U on Oct 3, 2004 12:18:59 GMT -5
NHCA is that your goped because if it is that's ****ing tight ass ****.
|
|
|
Post by PCX1100U on Oct 3, 2004 12:21:21 GMT -5
NHCA if that's your how fast will that thing go and can i see a full pic of it?
|
|
|
Post by TheNoisePolluter on Oct 3, 2004 19:05:34 GMT -5
|
|