|
|
Post by 33cckiller on Aug 26, 2009 12:41:03 GMT -5
So last night im looking at my scooter and figured i would clean up the carb. I couldnt find the high or low speed adjustment, I only found the idle adjustment. Is it possible to have a carb with no high and low speed adjustment? I saw a pic of a carb in the general section so I know where they should be. Am i missing something or did i get a cheap carb in my scooter.
ps 33cc john deere motor and i think its a viza viper (the frame is red)
|
|
|
|
Post by 33cckiller on Aug 27, 2009 13:11:04 GMT -5
took another look last night. Definitely dont see high and low speed adjustment screws?
Can someone please confirm thats possible? and if i truly have such a cheapo nonadjustable carb, should i buy another one? would my scooter go faster with an adjustable carb?
|
|
|
|
Post by TheNoisePolluter on Aug 28, 2009 19:33:57 GMT -5
I think you might have the performance carburetor or something different? If you could, just get a picture of it and I can help you more from there. There should be one on the barrel at the top...? Unless you have something different.
|
|
|
|
Post by 33cckiller on Aug 30, 2009 18:24:31 GMT -5
here are some pics of my carb: this is a top down view, you can see the idle adjust screw but shouldnt the high speed adjustment be here too?  this is the right side, again you can see the idle adjust but no low speed adjustment...  heres the bottom  |
|
|
|
Post by TheNoisePolluter on Aug 31, 2009 14:30:01 GMT -5
Oh wow that's interesting, I've never seen that before. So is it out of tune? You could get a different carburetor for it, I'd get the 15mm(5/8) performance one, the one you have on there now is only 10mm(3/8) ..They are worth the money.
|
|
|
|
Post by 33cckiller on Aug 31, 2009 16:34:35 GMT -5
|
|
|
|
Post by TheNoisePolluter on Aug 31, 2009 16:46:16 GMT -5
It's best to get the Viza one, because you need a matching manifold, and the stock one can not be bored out, nor will the pulse holes line up, But what I believe, or been told, is the Go-Ped HP carbs and manifold will fit on the John Deere 33cc motors, and the Go-Ped carburetors are much better and cheaper than Viza carbs on the Viza website.
..But let me check on that.
|
|
