FS: 41.5cc ETON powered scooter!

[wow]

INFO COMING SOON! sorry about this...

[wow]

ok heres the info, pictures are coming soon!

The scooter: The Frame is 4 years old motor is 9 months old. Kept in great shape over the years

-41.5cc engine
-TGN HP Carb
-NGK BPM7A Spark Plug
-De-restricted STOCK Exhaust (BRAND NEW)
-TGN Manifold
-Upgraded Smaller Air Filter (provides the same gains as a HP, but quieter)
-Porting on INTAKE and Exhaust
New Cylinder
-piston
-needle bearing
-rings
-wrist pin
-base gasket
Cases were cleaned
-ignation modules were cleaned +flywheel magnets
(GREAT SPARK!)
-3 month old hardware (replaced with new screws and nust thorughout the scoter, some stainless and some not.
-Waxed + Cleaned Daily!
-New fuel line + gas tank has been flushed
-Stickers were placed throughout (BRAND NAME)
-Finger throttle w/new cable
-New drums brakes
-New rear tire/tube
-Fuel line was custom routed underneath the frame and comes out of the back throught drilled holes, with a sticker covering...TRIX!
-new BLACK engine cover (and no this isnt spray painted, very hard to find in this color, usuallu on it GRAY...ewww)

Now for extras!

*NEW*Extra Piston + *used*Rings
Used scored piston
Used scored cylinder
Nuts + Bolts
Used scratched engine cover
Fuel Filter
BRAND NEW stock carb!
Cracked TGN manifold, repairable
Throttle Tube
and much more...look in pics!

im asking 600 shipped! price can change!...to look for a little preview of what the scooter looks like...check my website, those pictures were taking in DEC.
PICS COMING!

[Brandon R]

ok umm is there only one of this scooter? any ways sounds kinda crappy Cracked manifold< not to good

[wow]

one scooter, i mistake the cracked manifold. I orginaly cracked the first one now have a brand new one. The stock carb is on as of the moment

[Brandon R]

any pictures?

[fhlaxbb5]

yea give us some pics

[Brandon R]

and is ETON your motor? or do you just sell them

[wow]

im not able to find up to date pics...but here are some without the BRAND new stock exhaust..

img137.exs.cx/my.php?loc=img137&image=picture1336xe.jpg

img79.exs.cx/my.php?loc=img79&image=picture1348kt.jpg

img79.exs.cx/my.php?loc=img79&image=picture1377xq.jpg

img79.exs.cx/my.php?loc=img79&image=picture1393sc.jpg

update...the air filter pictured is not on there, i have a black small air filter on, does just as goood job. and the HP carb is not on there, u will need to a:buy and new one b: buy and new needle and gasket set

i have a brand new stock carb on ther know with all new gaskets and hits roughly 30 top. It takes a while to hit 30 because the portiing i have does not work correctly with the smaller stock carb. If u put the wt-603 carb on...YOU WILL see a huge difference!

[wow]

and im not the one to bull****..im very honest and know what im talking about and trustworthy, just ask venom. Price can change...this is a great scooter! also brandon i call them eton scooters due to the fact the have eton motors (high quality) the actual name is the rock scooter, low-rider rock scooter, some other sellers have them as raser and cobra scooter. I call them what i want. They all carry the41.5cc eton motor, but the frames differ from name to name. There are three companys who make them chuweng, golden century, cobra, and raser as far as i know.

[TheNoisePolluter]

you can get them at www.bossperformance.tv right?

[wow]

not any more..he carrys the first generaiton raser scooters...

[Dan]

is that frame ment for a gas scooter? it looks like one of those electric scooter frames, because of the width of the bottom.

[Dan]

but also, i have to admit, that scooter looks like its in great shape too. If you cant find ne1 that wants to buy it on here, just put it in the "Penny Saver" or in the part of the newspaper where people sell there old lawn mowers and stuff like that, and im pretty sure ull get a couple calls.

[wow]

hey where are u located in NY?

[Brandon R]

wouldnt matter he's moving to fl july 2nd